Spread Spectrum Signals - CDMA

Spread Spectrum uses wide band, noise-like signals. Because Spread Spectrum signals are noise-like, they are hard to detect. Spread Spectrum signals are also hard to Intercept or demodulate. Further, Spread Spectrum signals are harder to jam (interfere with) than narrowband signals. These Low Probability of Intercept (LPI) and anti-jam (AJ) features are why the military has used Spread Spectrum for so many years. Spread signals are intentionally made to be much wider band than the information they are carrying to make them more noise-like.

Spread Spectrum signals use fast codes that run many times the information bandwidth or data rate. These special "Spreading" codes are called "Pseudo Random" or "Pseudo Noise" codes. They are called "Pseudo" because they are not real gaussian noise.

Spread Spectrum transmitters uses similar transmit power levels to narrow band transmitters. Because Spread Spectrum signals are so wide, they transmit at a much lower spectral power density, measured in Watts per Hertz, than narrowband transmitters. This lower transmitted power density characteristic gives spread signals a big plus. Spread and narrow band signals can occupy the same band, with little or no interference. This capability is the main reason for all the interest in Spread Spectrum today.

Since the development of CDMA technology there has been many new releases and platforms. The original CDMA is now referred to as CDMAone. Several different variants of CDMA technology been developed continuously improving quality and data transfer speeds. Third generation CDMA technology, commonly referred to as CDMA2000 encompasses a wide variety of different standards, each continually improving upon the first including; 1X EV, 1XEV-DO, and MC 3X. CDMA2000 is the current standard used by most US carriers today. The first release of CDMA2000 was refereed to as either 3G1X, 1XRTT, or X.Designed to provide data transmissions of ten times faster then the previous technology and double the voice capacity of CDMAone.

Depending on the phone you have and its capabilities you will notice symbols in the default screen of your phone reading either 1X, 1XEV-DO or some variation of the two. This symbol defines the CDMA2000 standards your phone is operating on. Newer phones will display EV or EV-DO using the newer faster, more reliable CDMA technology.

Qualcomm the original developer of CDMA owns patents of this technology. They have granted royalty-bearing licenses to over 100 network operators.